Spectra-precision Survey Pro v3.80 Recon iPAQ Reference Manual Uživatelský manuál stáhnout pdf (Strana 230)

Survey Pro Reference Manual

R-224

Station Interval

: is the value that is added to the

Station

to Stake

after the button is pressed.

: advances the

Station to Stake

by the

Station Interval

Note: If the

Stake Corners

option is selected in the

Stakeout Settings screen, the button will

also stop at any horizontal or vertical alignment node,

and the beginning and end of any widening and super

elevation that falls within the interval.

, : These buttons are used to select the

particular node, or an offset to it, from your road profile

that you wish to stake. The segment name at the selected node is

also displayed. If staking the centerline with an offset, the side of the

road that the offset occurs is also displayed.

Offset

: When checked, allows you to specify an offset distance to

stake as opposed to staking the actual node locations.

Note: A positive value offset is applied at the specified distance from

each node away from the centerline. A negative value offset is

applied at the specified distance from each node toward the

centerline.

Note: If an offset occurs past the edge of the road, no vertical or cut /

fill information will be computed for that point.

: accesses the Backsight Setup

screen (Page R-78).

: returns to the previous screen.

: takes you to the next Stake Road

screen where the direction

and distance information to the stake point is displayed.

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 260 261

Žádné komentáře

Spectra-precision Survey Pro v3.80 Recon iPAQ Reference Manual Uživatelský manuál Strana 230