Spectra-precision Survey Pro CE v3.6 User Manual Uživatelský manuál Strana 213

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 407
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 212
Survey Pro Reference Manual
R-56
LOT# were used as in the screen shown above, all entries of
LOT10 would be connected. If LOT15 were also used as a
description during data collection, any future use of LOT15
would connect to the previous LOT15 entry.
Note: Linework descriptions are case sensitive.
Cmd
: lists the current type of line segment (linework) that will be
created after shooting the required points and storing them with the
associated
Description
. The following linework command options are
selected by repeatedly tapping the appropriate button:
: creates a straight line between the next two points
stored with a description associated with
Line
.
: creates a curve through the next 3 points stored
with a description associated with
P-Crv
.
: creates a curve between the
next two points that are stored with a
description associated with
R-Crv
. After
the second
R-Crv
point is shot, the
prompt shown will open and is used to
define the details of the curve.
: creates a curve with a specified
incoming tangent from the next two
points that are stored with a description
associated with
T-Crv
. When the second
point is stored, the prompt shown here
appears where the incoming azimuth or
bearing is specified.
Zobrazit stránku 212
1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 406 407

Komentáře k této Příručce

Žádné komentáře