Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Uživatelský manuál stáhnout pdf (Strana 172)

User’s Manual – Conventional Mode

162

Stake Out in Remote Mode

Performing stake out in remote mode is different from running in a

non-remote mode because the feedback is continuous and provided in

the rod’s point of view instead of the total station’s.

Stakeout data is presented in the Remote Staking screen. All of the

information is displayed as if the rod person were facing the total

station. The graphic portion of the screen will change depending on

how close the rod is to the stake point.

When the prism is located more than 10 feet, or 3 meters from the

stake point, the first screen shown below is displayed. In this

situation, the prism is shown at the center of the screen and an arrow

indicates the necessary direction of travel, as you face the total

station.

Once the prism moves to within 10 feet of the stake point, the second

screen is displayed. The stake point is now at the center of the screen

and the current prism location is displayed away from the center.

Dark green “lights” are also displayed around the screen to indicate

you are near the stake point.

When the prism is within 3 feet, or 0.3 meters of the stake point, the

“lights” change to light green and locating the stake point is simply a

matter of moving the round prism icon directly over the square stake

point icon.

When you are satisfied with the location of the prism, tap the

Done button. This will open the Stake Point

screen (see Page 76)

where the stake point can be stored.

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 366 367

Žádné komentáře

Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Uživatelský manuál Strana 172