Spectra-precision Layout Pro Field Software Quick Start Guide Uživatelský manuál stáhnout pdf (Strana 35)

The instrument is always shown at the top of the screen

and the green line connecting the instrument to the rod

location is always vertical. A blue line with arrow point

connecting the rod location to the stake point gives the

direction to that point (see example below right). You can

also use the tracklight to guide you.

5. With a mechanical station, the rod being now roughly in

line, the rod holder should normally be asked to move

forward or back, according to the instructions provided by

Layout Pro. After the rodman has made a significant

move, aim your instrument at the rod and tap Shoot again.

The Layout Pro display provides new indications, left or

right and forward or back, still in the perspective of the

total station operator.

With a robotic total station, move closer to the point

following the instructions on the data collector screen.

For both types of total stations, when the rod gets closer

to the stake point, the Layout Pro screen enters a new

guidance mode: the rodman location is represented by a

green circle and black reticle, the stake point location is

represented by a red circle and spot (see screens below).

6. With a mechanical station, continue to guide the rodman

closer to the stake position and re-shoot.

Mechanical Robotic

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

Žádné komentáře

Spectra-precision Layout Pro Field Software Quick Start Guide Uživatelský manuál Strana 35