Spectra-precision FAST Survey Uživatelský manuál stáhnout pdf (Strana 40)

English

•

hrough the Base ID drop-down list displayed further

down on the screen, select the name of the base you

want to work with.

If the Base ID list is blank, tap on next to it. In the

Name drop-down list, overwrite “<New>” with the

name of the base. Then enter its IP address and IP

port.

NOTE: For each new base entry, first select “<New>”

from the Name drop-down list, and then enter the base

parameters (Name, Address, Port, Send Rover Position

to Network?). Reciprocally, when you want to delete a

base entry, first select its name from the Name drop-

down list and then tap on the Delete button.

• Tap to validate the new base entry and return to the

RTK tab. The name of that new base is now the current

selection in the Base ID field.

4. Setting a rover to make a phone call to the base (Direct

Dial):

– Choose the appropriate device so you can set

Network=“Direct Dial”).

– Tap on next to the Base ID field to name the base

and enter its phone number. For EPOCH 50 and

ProMark 700, you additional need to specify the type

of corrections delivered by the base.

End of Rover

Configuration

Phase

• After you’ve been through all the tabs, tap to save all

your settings. The rover will start operating as configured.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 67 68

Žádné komentáře

Spectra-precision FAST Survey Uživatelský manuál Strana 40